Revolabs FLX2 VoIP Advanced - Manual (Page 55)

55
Audio
The Audio page can be used to configure audio settings and audio mixer settings of
your FLX. These settings are also available on the Handset. The figure below shows the
Audio page, followed by a description of each setting. After changing any of the
settings, click Save to save the settings. If you navigate away from any of the web
pages without saving settings, the changes on that page will be lost.
Audio
Ringer Volume
Choose the speaker volume for the ring tone played when the
phone receives an incoming call. This setting is separate from call
volume, which is set form the Handset while in a call. The range of
values is 0-16.
Ring Tone Select from one of the six provided ring tones, Ring 1-Ring 6.
EQ Setting The Equalizer setting allows you to adjust the speaker frequencies
to your preference for the room and the types of calls. The EQ
options are: Voice, Bass Boost, and Treble Boost.
Play Charging
Announcement Enable / Disable playing the message reminding users to return
the components to the charger tray after a conference call.
Audio Mixer
The settings below can be changed at any time during a call.
Speaker Mix
The Speaker Mixer specifies the mix between AUX IN and the
phone input to be played back on the speaker. It is a sliding scale
from -8 (favoring phone) to +8 (favoring AUX IN).
Phone Out Mix The Speaker Mixer specifies the mix between the microphones
and AUX IN to be transmitted to the far end during a call. It is a