Konica Minolta bizhub PRESS C8000e - Manual (Page 187)

bizhub PRESS C8000/e 5-47
5.3 Both Sides Adjust 5
% For the Zoom/Image Shift Adjustment, check paper at the center of the page.
The black + mark in the figure below represents an image on the front side, and the gray + mark repre-
sents the one on the back side.
Adjustment example of Zoom:
When the image on the back side is vertically enlarged to 10.1 mm against that of 10.0 mm on the front
side, press [Vertical] on [Back], and then press [1], [0], [0].
Press [+/-] to display [-100].
The back side images will be reduced by 1%.
Adjustment example of Image Shift:
When the image on the back side is misaligned downward by 0.5 mm and rightward by 0.3 mm against
that on the front side, press [Up/Down] of [Back], and then press [5]. [+5] is now displayed.
Press [Right/Left], and then press [3]. Press [+/-] to display [-3].
The back side images will be shifted upward by 0.5 mm and leftward by 0.3 mm.
6
When the Zoom/Image Shift Adjustment is completed, press [Close].
The Machine Screen will be restored.