Konica Minolta bizhub PRESS C8000e - Manual (Page 95)

bizhub PRESS C8000/e 3-31
3.1 Machine Configuration 3
No. Name Description
1 Finisher FS-521 front door Opens to allow staple supply and removal of mishan-
dled paper or jammed staples.
2 Primary (main) tray Holds non offset, offset, or stapled sets.
3 Exit guides Neatly aligns offset sets, or sets punched/folded by
Folding Unit FD-503.
4 Secondary (sub) tray Holds sets output in non offset mode.
5 Suspension button Pressed to suspend the current output job in order to
take out printed sheets from the tray. To restart the
output job, press Start on the control panel.
6 Lever [FS1] Opens leftward for removal of mishandled paper.
7 Lever [FS2] Opens upward for removal of mishandled paper.
8 Lever [FS4] Opens leftward for removal of mishandled paper.
9 Lever [FS5] Opens downward for removal of mishandled paper.
10 Knob [FS6] Turned to feed mishandled paper to the stapler unit.
11 Jam position display Indicates the position of mishandled paper by LED
lamps.
12 Handle [FS8] Withdraws the unit to allow removal of mishandled
paper.
13 Knob [FS7] Turned to ease removal of mishandled paper inside
the stapler unit.