Konica Minolta bizhub PRESS C8000e - Manual (Page 273)

bizhub PRESS C8000/e 7-5
7.1 Cleaning 7
7.1.4 Cleaning Scrap Box of Multi Punch GP-501
Punch waste can fall into the multi punch unit, and it may have adverse effects on machine operation. Please
clean the multi punch unit on a routine basis according to the procedure below.
1
Open the front door of the multi punch unit, and then open the
lever GP5.
2
Remove the punch waste inside the unit using a vacuum clean-
er.
3
Withdraw the scrap box.
NOTICE
Once withdrawing the scrap box from the multi punch unit, be
sure to empty it. The machine resets the counter every time the
scrap box is withdrawn, irrespective of whether or not the scrap
box is empty.
4
Remove punch waste inside the unit using a vacuum cleaner.
5
Close the front door of the multi punch unit when you finish cleaning.