Konica Minolta bizhub PRESS C8000e - Manual (Page 426)

10.1 Utility Menu Screen Outlines 10
bizhub PRESS C8000/e 10-12
[05 Z-Fold Position Adj.]
Adjust the folded positions in Z-Fold
mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold. Be sure to
start with the Single Fold adjustment,
then proceed to the Double Fold ad-
justment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
-50 (Long) to +50 (Short)
(1 step = 0.1 mm)
[06 Gate Position Adj.]
Adjust the folded positions in Gate
mode determined by the folding unit.
The position of Single Fold is calculat-
ed from the edge of the sheet, while
that of Double Fold is calculated from
the position of Single Fold and that of
Triple Fold from that of Double Fold. Be
sure to start with the Single Fold ad-
justment. Objects of adjustment:
Full Area, A3 w, B4 w, SRA4 w, A4 w, 12
e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom
(279-379 mm)
Adjustable range:
Single Fold/Triple Fold: -50 (Long) to +50
(Short)
(1 step = 0.1 mm)
Double Fold: -50 (Short) to +50 (Long)
(1 step = 0.1 mm)
[02 Finisher Adjustment] (Large Capacity Stacker LS-505)
This menu item is to be displayed and allowed on the machine mounted with Large Capacity
Stacker LS-505.
[05 Stacker Adjustment]
[01 Paper Width Adjustment]
Adjust the position of adjustment
plates if output sheets show misalign-
ment in crosswise direction on the
stacker tray. Objects of adjustment:
Stacker No. 1, Stacker No. 2
Adjustable range:
-20 (Narrow) to +20 (Wide)
(1 step = 0.1 mm)
[02 Paper Length Adjustment]
Adjust the position of the front stopper
if output sheets show misalignment in
paper feed direction on the stacker
tray. Objects of adjustment:
Stacker No. 1, Stacker No. 2
Adjustable range:
-20 (Opposite direction) to +20 (Paper feed
direction)
(1 step = 0.1 mm)
[02 Finisher Adjustment] (Saddle Stitcher SD-506)
This menu item is to be displayed and allowed on the machine mounted with Saddle Stitcher
SD-506.
[06 Saddle Stitcher Pos. Adj.]
[01 Staple Center Position]
Adjust the center position of staples
determined by the saddle stitcher.
Prerequisite: Paper Width Adjustment
(Staple) is completed. Adjustable range:
-20 (Leftward) to +20 (Rightward)
(1 step = 0.1 mm)
[02 Staple Paper Width Adj.]
Adjust the width of adjustment plates
of the saddle stitcher to be used in Sta-
ple mode. Objects of adjustment:
Full Area, SRA3 w, A3 w, B4 w, SRA4 w,
A4 w, B5 w, 13 e 19 w, 12 e 18 w, 11 e
17 w, 8.5 e 14 w, 8.5 e 11 w, 8.125 e
13.25 w, 8.5 e 13 w, 8.25 e 13 w, 8 e 13
w, 8K w, 16K w, Custom (380-463 mm),
Custom (257-379 mm)
Adjustable range: -20 (Narrow) to +20
(Wide)
(1 step = 0.1 mm)
Menu Item/Description Setting options (with default bolded)