Konica Minolta bizhub PRESS C8000e - Manual (Page 375)

bizhub PRESS C8000/e 9-57
9.8 [03 Finisher Adjustment] (Perfect Binder PB-503) 9
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [07 Perfect Binder Adjustment], and [05 Glue Finish Position] in se-
quence.
The Glue Finish Position Adjustment Screen will be displayed.
3
Load cover sheets in either cover tray of perfect binder or any other tray.
4
Load paper for body sets in the desired tray.
5
Select the size to be adjusted using [+] and [,] to scroll.
6
Press [Print Mode].
7
Select the tray key loaded with paper for body sets.
8
Press Start on the control panel. A sample pattern of perfect-bound book will be output.
9
Check that the glue finishes in proper position on both frontward and backward ends of the body set.
10
If any adjustment is required, press [Exit Print Mode] to return to the Glue Finish Position Adjustment
Screen.
11
Select either [Ahead] or [Back].
[1] Body pages [2] Finish position of frontward gluing [3] Finish position of backward gluing