Konica Minolta bizhub PRESS C8000e User Manual
Page 412
9.12
[05 Color Density Control]
9
bizhub PRESS C8000/e
9-94
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [05 Color Density Control] and [03 Register Paper Category] in sequence.
The Register Paper Category Screen will be displayed.
3
Select the desired row on the paper category list, then press [Print Mode].
NOTICE
If you select a row already registered with data, it will be overwritten with the colorimetric data.
The Input Paper Category Name Screen will be displayed.
4
Enter the desired name, then press [OK]
% Up to 22 alphanumeric characters can be entered for the paper category name.
The Print Mode Screen will be displayed.
5
Select the screen type.
% Press [Quality Adj.] to display the Quality Adjustment Screen.
% Press [)] on the right side of [Screen] to display the desired screen type. Or, press [Screen] to dis-
play the Screen Setting Screen, then select the desired screen type. Press [OK] on the Screen Set-
ting Screen, if displayed.
% Press [Close] on the Quality Adjustment Screen.
6
Select the tray to output the charts.
% Press [Output Setting] to display the Output Setting Screen.
% Select the desired output tray key, then press [OK].
7
Select the paper size.
% Select the desired paper tray key on the Print Mode Screen.
8
Press Start on the control panel.
% The machine will output the charts of the size selected in step 7.
9
Press [Exit Print Mode]. The Register Paper Category Screen will be restored.
The Register Paper Category Screen shows the name entered in step 4, and is ready to have the col-
orimetric data of that name loaded.
10
Scan multiple sheets of output charts with Spectrophotometer i1iSis XL or i1Pro to create the colori-
metric data.
11
Set the path [\C8000\ADJUST_DATA] to a USB flash drive, and save the measured data in the lowest
directory.
NOTICE
The measured data cannot be saved with any path other than that specified. Be sure to set the desig-
nated path to save the data. Also, be sure to save all the data created from multiple charts together.
12
Connect the USB flash drive stored with the measured data into
the USB port of the machine.
13
Press [Measured data load] on the Register Paper Category Screen.
The Colored Data File Select Screen will be displayed, which shows multiple colorimetric data saved in
the USB flash drive.