10 [06 power save setting, 06 power save setting] -49 – Konica Minolta bizhub PRESS C8000e User Manual

Page 463

Advertising
background image

bizhub PRESS C8000/e

10-49

10.2

[01 User Setting] - [01 System Setting]

10

1

Follow the procedure on page 10-3 to display the User Setting Menu Screen.

2

Press [01 System Setting] and [05 Default Screen Setting] in sequence.

3

Select the desired initial screen.

4

Press [OK] to complete the setting.

% To cancel the change, press [Cancel]. In either case, the System Setting Menu Screen will be re-

stored.

10.2.10

[06 Power Save Setting]

Select either Auto Low Power or Auto Shut OFF for the power save mode to be activated when Power Save
is pressed on the control panel. Select also the period of time to elapse before Auto Low Power or Auto Shut
OFF is activated.

Auto Low Power: [--- min.], [5 min.], [10 min.], [15 min.], [30 min.], [60 min.], [90 min.], [120 min.], [240 min.]

Auto Shut OFF: [--- min.], [0 min.], [1 min.], [30 min.], [60 min.], [90 min.], [120 min.], [240 min.]

NOTICE

Setting Auto Shut OFF to [--- min.] changes the setting of Auto Low Power to [5 min.], and then allows you
to change it to another time than [--- min.]

1

Follow the procedure on page 10-3 to display the User Setting Menu Screen.

2

Press [01 System Setting] and [06 Power Save Setting] in sequence.

3

Select the Power Save mode to be set manually by pressing Power Save on the control panel, by
pressing [Auto Low Power] or [Auto Shut OFF].

4

Specify the period of time that must elapse before Auto Low Power is activated.

% Use the keys [+] and [,] provided under "Auto Low Power" on the right side of the screen to select

the desired period of time. The default setting is [15 min.]

% If Auto Low Power is not needed, set Auto Shut OFF to another time than [--- min.], and select [---

min.] for Auto Low Power.

NOTICE

The period of time selected for Auto Low Power cannot exceed that selected for Auto Shut OFF. The
highlighted indication of the time in Auto Low Power area will go dark when the same period of time as
that of Auto Shut OFF is selected. In this case, Auto Shut OFF will function instead of Auto Low Power.

Advertising