2 chart adjustment, Chart adjustment -40 – Konica Minolta bizhub PRESS C8000e User Manual
Page 180
Advertising
5.3
Both Sides Adjust
5
bizhub PRESS C8000/e
5-40
14
Repeat the steps from 5 to 11 until the desired result is obtained.
% In step 11, make sure that [Back] is selected.
15
Press [Close].
The Machine Screen will be restored.
5.3.2
Chart Adjustment
If numerical data of misalignment between front and back sides is unknown, output a chart to measure the
measuring point with the scale, and then enter the measured value to make the adjustment.
NOTICE
Performing the Chart Adjustment may require readjustment of the Zoom/Image Shift Adjustment registered
in a paper profile.
1
Press the [MACHINE] tab to display the Machine Screen.
2
Press [Both Sides].
The Both Sides Adjust Screen will be displayed.
Advertising