Konica Minolta bizhub PRESS C8000e User Manual
Page 352
9.5
[03 Finisher Adjustment] (Folding Unit FD-503)
9
bizhub PRESS C8000/e
9-34
9.5.6
[03 Multi Folder (Fold) Adj.] - [04 Double Parallel Pos. Adj.]
Adjust the folded positions in Double Parallel mode determined by Folding Unit FD-503.
Objects of adjustment: Full Area, A3 w, B4 w, SRA4 w, A4 w, 12 e 18 w, 11 e 17 w, 8.5 e 14 w, 8.5 e 11 w,
8K w, Custom (380-458 mm), Custom (279-379 mm)
NOTICE
When adjusting both Single Fold and Double Fold, be sure to start with the Single Fold adjustment. The po-
sition of Single Fold is calculated from the edge of the sheet, while that of Double Fold is calculated from the
position of Single Fold. Consequently, the measurement (b) in step 7 is subject to the change in either position
of the fold.
NOTICE
With [Full Area] selected, the entered value will be applied to all sizes. With a specific paper size selected, set
value will be the sum of the entered value and the value previously specified for [Full Area].
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Press [03 Finisher Adjustment], [03 Multi Folder (Fold) Adj.], and [04 Double Parallel Pos. Adj.] in se-
quence.
The Double Parallel Position Adjustment Screen will be displayed.
3
Select the size to be adjusted using [+] and [,] to scroll.
4
Press [Print Mode].
5
Load the paper size to be adjusted into a tray, then select that tray key.
6
Press Start on the control panel. A sample pattern will be output.
7
Measure the lengths (a) and (b) of the output sheet.
Allowance: a +/- 1.5 mm, b +/- 1.5 mm
Paper size
a
b
11 e 17 w
214.4 mm
106.7 mm
A3 w
208.5 mm
103.8 mm
B4 w
175.0 mm
87.0 mm
8.5 e 14 w
176.3 mm
87.7 mm
A4 w
147.0 mm
73.0 mm
8.5 e 11 w
138.2 mm
68.6 mm
8K w
193.5 mm
96.3 mm
12 e 18 w
227.1 mm
113.1 mm
SRA4 w
158.5 mm
78.7 mm