Konica Minolta bizhub PRESS C8000e User Manual
Page 498
10.7
[02 Administrator Setting] - [01 System Setting]
10
bizhub PRESS C8000/e
10-84
10.7.28
[04/05 Expert Adjustment] - [05 Execute Adjust Operation]
Execute adjustment operations of [Gamma Automatic Adjustment], [Color Registration Auto Adj.], [Toner Re-
fresh Mode], and [Fusing Refresh Mode].
NOTICE
The title number given to [Expert Adjustment] will be [04] for the machine without Image Controller IC-601,
or [05] for the machine with that option mounted.
This operation is the same as that in [Adjustment] - [02 Execute Adjust Operation] accessed from the Machine
Screen.
1
Follow the procedure on page 10-3 to display the Administrator Setting Menu Screen.
2
Press [01 System Setting], [04/05 Expert Adjustment], and [05 Execute Adjust Operation] in sequence.
The Execute Adjust Operation Screen will be displayed.
3
Select the desired adjustment.
Multiple selections are available.
4
Press [OK], then press [Exit] on the Expert Adjustment Menu Screen. After exiting the Utility mode, the
machine starts the adjustment operation.
% To cancel the operation, press [Cancel]. In either case, the Expert Adjustment Menu Screen will be
restored.
Key
Function
[Gamma Automatic Adj.]
Make this adjustment when color reproducibility is poor in the whole
output.
[Color Registration Adj.]
Make this adjustment when misalignment of YMC is found in com-
paring the original and the output during successive output opera-
tions.
[Toner Refresh Mode]
Make this adjustment when output images show the following de-
fective conditions.
Grainy images
Random small spots
Small round white spots
[Fusing Refresh Mode]
Make this adjustment when lines caused by paper edges appear in
the image printed on paper wider than a paper size that has been
continuously used before. However, repeated refreshing operations
may result in fine, glossy lines on output images.