ADTRAN 5000 Series - Manual (Page 241)

Command Reference Guide Enable Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 241
show power supply
The show power supply command displays the power supply status.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 5000 Series units.
Command History
Release 6.1 Command was introduced.
Usage Examples
The following example displays the power supply status:
>enable
#show power supply
Power supply 1 is OK.
Power supply 2 is not present.