ADTRAN 5000 Series - Manual (Page 888)

Command Reference Guide PPP Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 888
alias link<“text”>
Each configured PPP interface (when referenced using SNMP) contains a link (physical port) and a bundle
(group of links). RFC1471 (for Link Connection Protocol) provides an interface table to manage lists of
bundles and associated links. The alias link command provides the management station an identifying
description for each link (PPP physical).
Syntax Description
<“text”> Describes the interface (for SNMP) by alphanumeric character string (must be
encased in quotation marks).
Default Values
By default, the PPP identification string appears as empty quotes. (“ “)
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 1.1 Command was introduced.
Functional Notes
The alias link string should be used to uniquely identify a PPP link. Enter a string that clearly identifies the
link.
Usage Examples
The following example defines a unique character string for the virtual PPP interface (1):
(config)#interface ppp 1
(config-ppp 1)#alias link “PPP_link_1”
Technology Review
Please refer to RFC1990 for a more detailed discussion on PPP links and bundles.