ADTRAN 5000 Series - Manual (Page 573)

Command Reference Guide Ethernet Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 573
lldp receive
Use the lldp receive command to allow LLDP packets to be received on this interface.
Syntax Description
No subcommands.
Default Values
By default, all interfaces are configured to send and receive LLDP packets.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000
and Total Access 900 Series units.
Command History
Release 8.1 Command was introduced.
Usage Examples
The following example configures Ethernet interface 0/1 to receive LLDP packets:
(config)#interface eth 0/1
(config-eth 0/1)#lldp receive