ADTRAN 5000 Series - Manual (Page 281)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 281
G LOBAL C ONFIGURATION M ODE C OMMAND S ET
To activate the Global Configuration mode, enter the configuration command at the Enable Security
mode prompt. For example:
>enable
#configure terminal
(config)#
The following commands are common to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
on page 28
description <text> on page 31
do on page 32
end on page 33
exit on page 34
shutdown on page 35
All other commands for this command set are described in this section in alphabetical order.
aaa accounting commands begin on page 284
aaa authentication commands begin on page 287
aaa authorization commands begin on page 292
aaa group server [radius | tacacs+] <listname> on page 294
aaa on on page 296
aaa processes <threads> on page 298
arp <ip address> <mac address> arpa on page 299
auto-config [filename <name> | restart | retry-count <number>| server <name or address>] on
page 300
banner [exec | login | motd] <character> <message> <character> on page 302
boot system flash <filename> [no-backup | <backup filename>] on page 303
bridge <group#> protocol ieee on page 304
clock [auto-correct-dst | no-auto-correct-dst] on page 305
clock set <time> <day> <month> <year> on page 306
clock timezone <text> on page 307
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port> on
page 310
crypto commands begin on page 313