ADTRAN 5000 Series - Manual (Page 298)

Command Reference Guide Global Configuration Mode Command Set
61200990L1-35E Copyright © 2005 ADTRAN 298
aaa processes <threads>
Use the aaa processes command to set the number of threads available to the AAA subsystem. Use the no
form of this command to return to the default setting. For more detailed information on AAA functionality,
refer to the Technology Review section of the command aaa on
on page 296 .
Syntax Description
<threads> Specifies the number of threads available to the AAA subsystem. Range: 1 to 64.
Default Values
By default, this is set to 1 process.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1 Command was introduced.
Functional Notes
Increasing this number may speed up simultaneous authentication at the cost of system resources
(e.g., memory).
Usage Examples
The following example specifies five available threads for the AAA subsystem:
(config)#aaa processes 5