Andrew ES45T - Manual (Page 15)

Step 3
Step 4
15
Lay out support and elevation pivot assembly (P/N 49635) and support angles (P/N
49623) as shown in Figure 6.
Installation Procedures
Figure 6
Loosely bolt support and elevation pivot assembly (P/N 49635) and support angles (P/N
49623) to connection plates as shown in Figure 7.
•
Use A-325 ½ x 1-½ in. bolts and nuts. (see page 12)
•
Angles should be attached with flat of angle facing downward
Figure 7