Andrew ES45T - Manual (Page 17)

Step 7
Step 8
Step 9
17
Tightly knot 40 ft. rope to azimuth axis joint (P/N 300748) for hoisting to azimuth axis
support (P/N 49634).
Installation Procedures
Figure 10
Station one installer on a ladder to hoist support assembly as at least one other installer
walks the assembly into the upright position as shown in Figure 10.
Loosely fasten lower azimuth axis joint (P/N 300746) and upper azimuth axis joint (P/N
300748) to azimuth axis support (P/N 49634) as demonstrated in Figure 11.
•
Use 9956-1101 U-bolts, ½ in lockwasher and ½-13 hex nuts.
Figure 11