Andrew ES45T - Manual (Page 45)

Feed Support
Assembly
Step 1
Step 2
45
Installation Procedures
By now, you can see that your installation of the 4.5-Meter Earth Station Antenna is
almost complete. The feed system is the last phase of the base installation described in
this manual.
Note: All antenna options (such as feeds, shields, anti-icing, etc.) possess installation
instructions within the individual kits contained in the shipment.
Attach feed struts to 222930 feed support as shown in Figures 52 and 53.
•
Use 3/8 x 2 in. bolt, lockwasher and nut
Install supplied feed system according to installation instructions provided with applica-
ble feed system.
Figure 52
Figure 53