Andrew ES45T - Manual (Page 24)

Step 4
Step 5
24
Installation Procedures
Raise segments and hold while loosely attaching mounting ring hub (P/N 49965) to con-
vex side of center opening.
•
Use ¼-20 capscrews, lockwashers and nuts
•
Insert capscrews from concave side of reflector segments
Loosely attach reflector segments A-B and D-E to diameter setting bands (P/N 49426)
with edge joining plates (P/N 49424) and capscrew hardware as shown in Figure 23.
•
Use ¼-20 capscrews, lockwashers and nuts
•
Insert capscrews from concave side of reflector segments
Figure 23
ES45T-R Reflector Assembly