Andrew ES45T - Manual (Page 59)

Step 5
59
Installation Procedures
Attach remaining end of elevation strut to elevation axis bracket of main triangle assem-
bly as shown in Figures 71 and 72.
•
Use ¾ x 4-½ in. bolt, lockwasher and nut
Figure 71 Figure 70
Figure 72
You have now completed the attachment of the reflector to the tripod ground mount
assembly. Proceed to the Elevation and Azimuth Adjustments section for instructions on
pointing your antenna towards the desired satellite.
ES45T-T Reflector Assembly