Recommended tools, Getting started – Andrew ES45T User Manual
Page 7
Recommended
Tools
Note: Failure to follow an installation procedure could result in damage to equipment or
personal injury.
Additional warnings will be displayed throughout this manual for your awareness. These
warnings can be identified in warning boxes as shown in the following sample.
Andrew disclaims any liability or responsibility for the results of improper or unsafe
installation, operation or maintenance practices.
Andrew supplies all appropriate hardware/parts required for the installation of your 4.5-
Meter Earth Station Antenna. All tools necessary for the installation process should be
provided by the installation crew. Andrew recommends that the following tools be used
for a proper installation of the 4.5-Meter Earth Station Antenna.
Table 1. Recommended Tools
Tool
Size
Qty.
Open End Wrench
1/4“
2
3/8“
2
1/2“
2
9/16”
2
5/8”
2
3/4”
2
7/8“
2
1-1/4”
1
Drive Sockets
7/16”
2
9/16”
1
3/4”
1
7/8”
1
1-1/16”
1
1-1/4”
1
Spud Wrench
1-1/16“
1
Breaker Bar
1/2”
1
Screw Driver
Standard
1
Phillips
1
Allen Wrench
1/2“
1
Tape Measure
Standard
1
Felt-tip Marker
Standard
1
Hammer
Standard
1
Rubber Mallet
Standard
1
Pry Bar
Standard
1
Tin Snips
Standard
1
Crane
1 Ton Minimum Capacity
1
Rope/Cord (2000 lb breaking strength)
50 ft
1
Shackles
5/8“
2
Ladder
10 Foot Extension
1
Nylon Web Sling
3” x 3’
2
7
Getting Started