Tremolo, Rotary, Uni-v – Boss Audio Systems Boss CDSM AMP EFFECTS PROCESSOR GT-100 User Manual
Page 16: Tremolo rotary uni-v pan, Effect
EFFECT
16
TREMOLO
Tremolo is an effect that creates a cyclic change in volume .
Parameter
Value
Explanation
WAVE SHAPE 0–100
Adjusts changes in volume level . A higher
value will steepen wave’s shape .
RATE
0–100,
BPM –
Adjusts the frequency (speed) of the change .
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specified for
each patch . This makes it easier to achieve
effect sound settings that match the tempo
of the song .
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time .
DEPTH
0–100
Adjusts the depth of the effect .
LEVEL
0–100
Adjusts the volume .
ROTARY
This produces an effect like the sound of a rotary speaker .
Parameter
Value
Explanation
SPEED
SELECT
SLOW, FAST
This parameter changes the simulated
speaker’s rotating speed (SLOW or FAST) .
RATE-SLOW
0–100,
BPM –
This parameter adjusts the SPEED SELECT of
rotation when set to “SLOW .”
RATE-FAST
0–100,
BPM –
This parameter adjusts the SPEED SELECT of
rotation when set to “FAST .”
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specified for
each patch . This makes it easier to achieve
effect sound settings that match the tempo
of the song .
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time .
DEPTH
0–100
This parameter adjusts the amount of depth
in the rotary effect .
RISE TIME
0–100
This parameter adjusts the time it takes for
the rotation SPEED SELECT to change when
switched from “SLOW” to “FAST .”
FALL TIME
0–100
This parameter adjusts the time it takes for
the rotation SPEED SELECT to change when
switched from “FAST” to “SLOW .”
LEVEL
0–100
Adjusts the volume .
UNI-V
This models a Uni-Vibe .
Although this resembles a phaser effect, it also provides a unique
undulation that you can’t get with a regular phaser .
Parameter
Value
Explanation
RATE
0–100,
BPM –
Adjusts the rate of the UNI-V effect .
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specified for
each patch . This makes it easier to achieve
effect sound settings that match the tempo
of the song .
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time .
DEPTH
0–100
Adjusts the depth of the UNI-V effect .
LEVEL
0–100
Adjusts the volume .
PAN
With the volume level of the left and right sides alternately changing,
when playing sound in stereo, you can get an effect that makes the guitar
sound appear to fly back and forth between the speakers .
Parameter
Value
Explanation
TYPE
AUTO
This varies the volume level on the left and
right according to the settings for WAVE
SHAPE, RATE, and DEPTH .
MANUAL
Output uses the volume balance set with
POS .
WAVE SHAPE
*1
0–100
Adjusts changes in volume level .
A higher value will steepen wave’s shape .
RATE *1
0–100,
BPM –
Adjusts the frequency (speed) of the change .
* When set to BPM, the value of each
parameter will be set according to the
value of the “MASTER BPM” specified for
each patch . This makes it easier to achieve
effect sound settings that match the tempo
of the song .
* If, due to the tempo, the time is longer than
the range of allowable settings, it is then
synchronized to a period either 1/2 or 1/4
of that time .
DEPTH *1
0–100
Adjusts the depth of the effect .
POS *2
L 100–CENTER–
R 100
This adjusts the volume balance between the
left and right channels .
LEVEL
0–100
Adjusts the volume .
*1 Setting available when TYPE is set to AUTO .
*2 Setting available when TYPE is set to MANUAL .