Boss Audio Systems Boss CDSM AMP EFFECTS PROCESSOR GT-100 - Manual (Page 3)

3
Basic Operation
Choose what you’re going to edit
Press one of the following buttons .
1
Select an item
Exit the settings
Edit the values
2
4
3
Editing on the GT-100 is extremely simple; the procedure is always the same . .
Use to select an item shown in the left
display .
Press .
Use to edit the values
shown in the right display .
Effect
Here you can edit the parameters of each effect .
System
Here you can make settings that apply to the
entire GT-100, such as output settings and
phrase loop settings .
EZ (Easy) Tone
Here you can create the desired tone simply by
choosing a musical style and the type of song you
have in mind . You can also customize the amp and
overdrive/distortion settings in an intuitive way .
Control/Expression
Here you can assign the desired functions to the
[ACCEL/CTL] pedal, [EXP] pedal, and external
pedals .
Turn the knobs
to edit the
values .
If page tabs are shown in the screen, you can use the
[PAGE] buttons to move between tabs .
The screen shown here is an example of when you’ve pressed the
[EFFECT] button .
You’ll be returned to the Play screen .
Turn knob [4] to select the
desired item (the cursor will
move) .
page 5
page 4
page 26
page 31
NOTE
The settings you’ve edited will be lost when you switch patches . If you want to keep the edited settings, you must save them as a user patch
(Owner’s Manual: p . 13) .