Other settings, Tuner metronome mode, Manual mode – Boss Audio Systems Boss CDSM AMP EFFECTS PROCESSOR GT-100 User Manual
Page 37: Tuner, Metronome, Editing procedure
37
Other Settings
TUNER METRONOME MODE
Editing procedure
1.
Simultaneously press pedals [1] and [2] .
The tuner function and the metronome function will turn on .
2.
Use knobs [1], [4]–[8] to specify the settings .
3.
Simultaneously press pedals [1] and [2] to return to
the Play screen .
You can also return to the Play screen by pressing the [EXIT]
button .
TUNER
Here you can make settings for the TUNER mode .
Parameter
Value
Explanation
PITCH
435 Hz–445 Hz
Specifies the reference pitch .
OUTPUT
MUTE
Sound will not be output while tuning .
BYPASS
While tuning, the sound of the guitar being
input to the GT-100 will be output without
change . All effects will be off .
THRU
Allows you to tune while hearing the
current effect sound .
METRONOME
Here you can make settings for the METRONOME mode .
Parameter
Value
Explanation
TEMPO
40–250
Specifies the tempo of the metronome .
BEAT
1/1–8/1,
1/2–8/2,
1/4–8/4,
1/8–8/8
Selects the time signature .
ON/OFF
OFF, ON
Turns the metronome on/off .
LEVEL
0–100
Adjusts the volume of the metronome .
MANUAL MODE
Editing procedure
1.
Simultaneously press pedals [BANK DOWN] and
[BANK UP] .
The MANUAL mode will turn on .
2.
Use knobs [1]–[8] to specify the settings .
3.
Simultaneously press pedals [BANK DOWN] and
[BANK UP] to return to the Play screen .
Here you can make settings for the MANUAL mode .
Parameter
Value
Explanation
BANK DOWN
OFF, ACCEL, PL (PHRASE LOOP),
PL R/P, PL S/P, PL CLR, CH A/B,
OD SOLO, A/B SOLO, A&B SOLO,
CMP, OD, PREAMP, EQ, FX1, FX2,
DLY, CHO, REV, PDL FX, S/R,
AMP CTL, TUNER, MANUAL,
BPM TAP, DLY TAP,
MIDI (MIDI START), MMC PLAY,
LEV +10, LEV +20, LEV -10, LEV -20,
NUM INC, NUM DEC,
BANK INC, BANK DEC
You can assign the desired
effects unit to each pedal .
BANK UP
NUMBER
PEDAL 1
NUMBER
PEDAL 2
NUMBER
PEDAL 3
NUMBER
PEDAL 4
PHRASE LOOP
ACCEL/CTL