BT VP1000 User Manual
Page 31
SHOW / OK
NEXT
SHOW / OK
NEXT
0
HOME
BT Home Monitor ~ Issue 5 ~ 1st Edition ~ 26_01_ 04 ~ 5725
To name the room in which the detector is to be
located, follow these instructions:
PRESS
DISPLAY
Display shows S (number):
LOCATION.
You need to choose from the
following list of locations.
Scroll through these options.
1. Attic
17. Hall
2. Back Door
18. Kitchen
3. Basement
19. Laundry
4. Bathroom
20. Living Room
5. Bedroom
21. Master Bath
6. Child Room
22. Master Bdrm
7. Conservatory
23. Study
8. Play Room
24. Upstairs
9. Dining Room
25. Utility Room
10. Downstairs
26. Garden
11. Emergency
27. Custom 1
12. Fire
28. Custom 2
13. Front Door
29. Custom 3
14. Garage
30. Custom 4
15. Garage Door
31. Custom 5
16. Guest Room
Please refer to Section 4 Record
Speech for more information on
Custom Locations.
To confirm the change.
To decide if you want the sensor to make a
sound when triggered, when the system is
switched off, follow these instructions:
One useful application is to configure a sensor
near your front door to CHIME when it is opened,
so you know when someone has entered your
house.
Note that the chime function must be activated
by pressing the number 8 button on the Control
Panel keypad.
PRESS
DISPLAY
Display shows S (number): CHIME.
Choose by scrolling through the
following options.
Scroll through these options
and select the way you want
your sensor to work.
1.
Chime off.
2.
Melody Chime.
3.
Sensor Name.
Display shows S (number):
Choose either:
To move to the next sensor.
Or
Three times, then <OK> to exit to
return to READY.
Please remember to update your personal
account with this information so that your
monitoring service can report information
accurately. You can do this by ringing the
number shown on your registration form or
via your Internet account.
SHOW / OK
SHOW / OK
NEXT
30
SECTION
4