Pioneer AVIC-X1BT - Manual (Page 107)

105
Chapter
8
Cu
st
om
ising t
h
e A
u
dio So
u
rce
S
etting
AV
Setting Up the DVD Player
To set up the DVD of an optional DVD player,
please refer to the “Owner’s Manual” for that
DVD player.
DVD setup adjustments
You can use this menu to change audio, subtitle,
parental lock and other DVD settings.
(1) DVD setup menu display
Shows the DVD setup menu names.
1
Touch  and touch the screen to display
touch keys.
2
Touch ➞ to display “SETUP”.
Touch ➞ until “SETUP” appear in the screen.
SETUP will be displayed instead of MENU.
3
Touch “SETUP” when the disc is
stopped.
The DVD setup menu is displayed.
4
Touch the desired function.
Setting the language
You can set a desired subtitle, audio and menu
language. If the selected language is recorded on
the DVD, subtitles, audio, menu are displayed in
that language.
1
Touch “SETUP” and “LANGUAGE” and
then touch “S.TITLE LANGUAGE”,
“AUDIO LANGUAGE” or “MENU LAN-
GUAGE”.
Each language menu is displayed and the cur-
rently set language is selected.
2
Touch the desired language.
When you select “OTHERS”, a language
code input display is shown. Input the four
digit code of the desired language then touch
“ENTER”.
➲ Language code chart for DVD ➞ Page 114
❒ If the selected language is not recorded on
the disc, the default language specified on
the disc is output and displayed.
❒ You can also switch the subtitle and audio
language by touching “S.TITLE” or
“AUDIO” during playback.
➲ Changing the subtitle language during
playback (Multi-subtitle) ➞ Page 69
➲ Changing audio language during play-
back (Multi-audio) ➞ Page 69
❒ Even if you use “S.TITLE” or “AUDIO” to
switch the subtitle or audio language, this
does not affect the settings here.
Setting assist subtitles on or off
Assist subtitles offer explanations for the aurally
impaired. However, they are only displayed if they
are recorded on the DVD.
You can turn assist subtitles on or off as desired.
1
Touch “SETUP” and then touch “ASSIST
S.TITLE”.
Touching “ASSIST S.TITLE” switches
between “ON” and “OFF”.
Setting angle icon display
You can set to display the angle icon on scenes
where the angle can be switched.
1
Touch “SETUP” and then touch “MULTI
ANGLE”.
Touching “MULTI ANGLE” switches
between “ON” and “OFF”.
Setting the aspect ratio
There are two kinds of display. A wide screen dis-
play has a width-to-height ratio (TV aspect) of
16:9, while a regular display has a TV aspect of
4:3. Be sure to select the correct TV aspect for the
display connected to REAR OUT.
(1)
Setting
Up t
h
e D
V
D Player