Pioneer AVIC-X1BT - Manual (Page 29)

27
Chapter
2
Menu and Map Display
NA
VI
❒ If the DVD Map Disc does not contain the data
for these items, the information is not availa-
ble.
City Map
In certain metropolitan city areas, a more
detailed “City Map” is available at the 50 m (0.05
mi) map scale or lower.
❒ If the DVD Map Disc does not contain the data
for city area, detailed “City Map” is not availa-
ble.
❒ Detailed city map is not displayed during the
memory navi mode.
❒ With the exception of when driving on a
motorway, if you are driving by an area where
a City Map is available at the 100 m (0.1 mi)
map scale, a message appears informing you
that you have entered a city map area.
Display items
Guidance point*
The next guidance point (next turning point, etc.)
is shown by a yellow flag.
Destination*
The chequered flag indicates your destination.
(1) Name of the next street to be used*
(2) Distance to the guidance point*
Touch to access the next information.
(3) Current location
The current location of your vehicle. The tip of the
triangular mark indicates your heading and the
display moves automatically as you drive.
(4) Distance to the destination (or distance to
way point)*
If way points are set, the display changes with
each touch. When two or more way points are
set, the distance to the destination and the dis-
tance to the next way point are switched.
(5) Name of the street your vehicle is travel-
ling along (or City Name, etc.)
(6) Compass
The red arrow indicates north. If the scale is less
than 50 km (25 mi), touching the map changes
the direction that it is displayed in (north up/
heading up). When the scale of the map is
greater than 50 km (25 mi), it is fixed to “north
up”.
Heading up:
The map display always shows the vehicle’s
direction as proceeding toward the top of the
screen.
North up:
The map display always has north at the top of
the screen.
(7) Zoom in/Zoom out
Touch to change the map’s scale.
➲ Changing the map’s scale ➞ Page 28
(8) Map scale
The scale of the map is indicated by distance.
Except for on the Vehicle Dynamics Display,
the scale of the map is displayed at the top right
of the screen.
➲ Changing the map’s scale ➞ Page 28
(9) VOICE icon
Touch to change to voice recognition mode.
❒ This is displayed only when the microphone
for voice recognition is connected.
➲ The voice operation of the navigation system
➞ Chapter 9
(10) TMC icon
When a route has been calculated, touch to
check whether there is any traffic jam or closure
information on your route. When no route has
been calculated, touch to display the traffic list.
(11) Current time
(12) Estimated time of arrival (or travel time
to your destination)*
The display alternates by touching it.
The estimated time of arrival is automatically cal-
culated from the Average Speed set and the
actual average speed.
➲ How to set average speed ➞ Page 57
(1)
(5) (9)
(4)
(11) (8)
(2)
(12)
(3) (6)
(7)