Pioneer AVIC-X1BT - Manual (Page 108)

106
Chapter
8
Customi
sing
the Audio Source Setting
AV
• When using a regular display, select either
LETTER BOX or PANSCAN. Selecting 16:9
may result in an unnatural picture.
• If you select the TV aspect, navigation system’s
display changes to the same setting.
1
Touch “SETUP” and then touch “TV
ASPECT”.
Each touch of the TV ASPECT changes the
settings as follows:
• 16:9 — Wide screen picture (16:9) is dis-
played as it is (initial setting)
• LETTER BOX — The picture is in the
shape of a letter box with black bands at the
top and bottom of the screen
• PANSCAN — The picture is cut short at
the right and left of the screen
❒ When playing discs that do not specify
PANSCAN, playback is with LETTER
BOX even if you select the PANSCAN
setting. Confirm whether the disc package
bears the
mark. (See “Hardware
Manual”.)
❒ Some discs do not enable changing of the
TV aspect. For details, refer to the disc’s
instructions.
Setting the parental lock
Some DVD-Video discs let you use parental lock
to restrict the viewing of violent and adult ori-
ented scenes by children. You can set the paren-
tal lock level in steps as desired.
• When you set a parental lock level and then
play a disc featuring parental lock, code
number input indications may be displayed. In
this case, playback will begin when the correct
code number is input.
Setting the code number and level
When you first use this function, register your
code number. If you do not register a code
number, parental lock will not operate.
1
Touch “SETUP” and “PARENTAL”.
2
Touch “PARENTAL”.
3
Touch 0 — 9 to input a four digit code
number.
4
While the input number is displayed,
touch “ENTER”.
The code number is registered, and you can
now set the level.
5
Touch any of 1 — 8 to select the desired
level.
The parental lock level is set.
• LEVEL 8 — Playback of the entire disc is
possible (initial setting)
• LEVEL 7 — LEVEL 2 — Playback of discs
for children and non-adult oriented discs is
possible
• LEVEL 1 — Playback of discs for children
only is possible
❒ If you want to change the parental level,
enter the registered code number in the
Step 2.
❒ We recommend to keep a record of your
code number in case you forget it.
❒ The parental lock level is recorded on the
disc. You can confirm it by looking at the
disc package, included literature or on the
disc itself. With discs that do not feature a
recorded parental lock level, you cannot
use parental lock.
❒ With some discs, parental lock operates to
skip certain scenes only, after which nor-
mal playback resumes. For details, refer to
the disc’s instructions.
❒ If you forget the registered code number,
touch “CLEAR” 10 times on the screen in
the Step 2. The registered code number is
cancelled, letting you register a new one.
16 : 9 LB
Setting
Up t
h
e D
V
D Player