Pioneer AVIC-X1BT - Manual (Page 141)

139
A
ppe
ndi
x
NA
VI/
A
V
Error Messages
When problems occur with disc playback, an error message appears on the display. Refer to the table
below to identify the problem, then take the suggested corrective action. If the error persists, contact
your dealer or your nearest PIONEER Service Centre.
The messages in “( )” will appear on the sub-display.
This function is not available with the
current map disc.
The current position is “areas not
stored on the map disc (unrecorded
areas)” and an attempt was made to
zoom in to make the scale 500 m or
more.
Zoom in again after the vehicle
moves into an area stored on the
map disc.
Or, replace the map disc and try to
zoom in again.
Failed to save to memory. Please re-
enter setting.
The settings could not be saved for
some reason.
• Retry.
• Consult the Pioneer Local dealer if
this message persists.
Message When What to do
Message Cause Action (See)
Error-02
(ERROR-20, ERROR-
21, ERROR-22)
Dirty Clean disc.
Scratched disc Replace disc.
The disc is loaded upside down Check that the disc is loaded correctly.
Error-05-82
(ERROR-50)
Electrical or mechanical Press the RESET button. (“Hardware man-
ual” and refer to page 130 in this manual.)
DIFFERENT REGION
DISC (REGION ERR)
The disc does not have the same region
number as the navigation system
Replace the DVD-Video with one bearing the
correct region number.
NON PLAYABLE DISC
(NON-PLAY)
This type of disc cannot be played by the
navigation system
Replace the disc with one the navigation sys-
tem can play.
THERMAL PROTEC-
TION IN MOTION
(TEMP)
The temperature of the navigation system is
outside of the normal operating range
Wait until the unit’s temperature returns to
within normal operating limits.