Pioneer AVIC-X1BT - Manual (Page 79)

77
Chapter
7
U
sing
the A
V
Source
(Pioneer A
V
Eq
uipment)
AV
Chapter 7
Using the AV Source (Pioneer AV Equipment)
When Pioneer audio equipment is connected to
the navigation system using IP-BUS or AV-BUS,
such equipment can be operated from the navi-
gation system. This chapter describes the opera-
tion of the audio source that can be used when
the Pioneer audio equipment is connected.
When reading this chapter, please also refer to
the operation manual of the AV equipment con-
nected to the navigation system.
Multi-CD Player
Listening a CD
You can use the navigation system to control a
multi-CD player, which is sold separately.
These are the basic steps necessary to play a CD
with your multi-CD player.
➲ More advanced M-CD operation ➞ Page 78
❒ Pressing the DISP button changes the
screen display.
➲ Switching screen display ➞ Page 111
(1) Source icon
Shows which source has been selected.
(2) Disc number indicator
Shows the disc currently playing.
(3) Track number indicator
Shows the track currently playing.
(4) Play time indicator
Shows the elapsed playing time of the current
track.
(5) Disc title, Disc artist, Track title and
Track artist indicator
When playing CD TEXT disc, each Disc title, Disc
artist, Track title or Track artist is displayed.
Touch “DISP” repeatedly to switch these items.
(6) Disc list display
Shows the disc list in multi-CD player.
1
Touch the source icon and then touch “M-
CD” to select the multi-CD player.
2
Touch any of the keys 01 — 12 to select a
disc you want to listen to.
If you want to select a disc located at 7 to 12,
touch or to display 07 — 12.
When 01 — 06 and 07 — 12 are not displayed,
you can display them by touching “DISP”.
You can also sequentially select a disc by
touching  or  or moving the joystick up or
down.
3
To skip back or forward to another track,
touch  or .
Touching  skips to the start of the next track.
Touching  once skips to the start of the cur-
rent track. Touching again will skip to the pre-
vious track.
You can also skip back or forward to another
track by moving the joystick left or right.
4
To perform fast forward or rewind, keep
touching  or .
You can also perform fast rewind/fast forward
by holding the joystick left or right.
❒ When the multi-CD player has performed
the preparatory operations, READY is dis-
played.
❒ If the multi-CD player does not operate
properly, an error message such as
ERROR-11 may be displayed. Refer to the
multi-CD player owner’s manual.
❒ For a normal CD, the disc list shows “–”.
For a CD TEXT disc, a disc title appears.
➲ Using CD TEXT function ➞ Page 80
❒ If there are no discs in the multi-CD player
magazine, NO DISC is displayed.
(2) (1) (4)
(6)
(3) (5)
M-CD