Disc multi-cd player, Advanced multi-cd player operation, Repeating play 78 – Pioneer AVIC-X1BT User Manual
Page 80: Playing tracks in a random order, Scanning cds and tracks, Advanced multi-cd player oper- ation, Repeating play
78
Chapter
7
Using the
AV Source (Pionee
r
AV E
q
uipment)
AV
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.
(But the navigation system can perform the disc
list display up to Disc 12 with a 50-disc multi-CD
player.)
Advanced multi-CD player oper-
ation
(1) Function display
Shows the function names.
➲ How to display the FUNCTION menu ➞
Page 62
Repeating play
There are three repeat play ranges for the multi-
CD player: M-CD (multi-CD player repeat),
TRACK (one-track repeat) and DISC (disc
repeat).
1
Touch “REPEAT” in the FUNCTION
menu.
Each touch of “REPEAT” changes the set-
tings as follows:
• M-CD — Repeat all discs in the multi-CD
player
• TRACK — Repeat just the current track
• DISC — Repeat the current disc
❒ If you select other discs during repeat play,
the repeat play range changes to M-CD.
❒ If you perform track search or fast forward/
rewind during TRACK, the repeat play
range changes to DISC.
Playing tracks in a random order
Random play lets you play back tracks in a ran-
dom order within the repeat range, M-CD or
DISC.
1
Select the repeat range.
➲ Repeating play ➞ Page 78
2
Touch “RANDOM” in the FUNCTION
menu.
Touching “RANDOM” switches between
“ON” and “OFF”.
Tracks will play in a random order within the
previously selected M-CD or DISC ranges.
Scanning CDs and tracks
When the repeat play range is set to DISC, the
beginning of each track on the selected disc
plays for about 10 seconds. When the repeat play
range is set to M-CD, the beginning of the first
track of each disc is played for about 10 seconds.
1
Select the repeat range.
➲ Repeating play ➞ Page 78
2
Touch “SCAN” in the FUNCTION menu.
Touching “SCAN” switches between “ON”
and “OFF”.
The first 10 seconds of each track of the cur-
rent disc (or the first track of each disc) is
played.
3
When you find the desired track (or disc)
touch “SCAN” to turn scan play off.
❒ After track or disc scanning is finished,
normal playback of the tracks will begin
again.
(1)
M-
CD