Pioneer AVIC-X1BT - Manual (Page 22)

20
Chapte
r
1
Ba
sic Op
eration
NAVI
/A
V
(1) Current location
(2) Distance to the destination
(3) Estimated time of arrival (or travel time to
your destination)
(4) Memory navi indicator
Flashing green indicates that the data is being
read. When the data reading has completed, this
indicator disappears from the screen.
➲ Memory navi mode ➞ Page 123
Memory navi mode
While the DVD Map Disc is inserted, you can
store the data on the DVD Map Disc into the
memory of the navigation system. If the DVD Map
Disc is removed from the navigation system after
the data is stored, navigation is performed using
the data in the memory (memory navi mode). In
the memory navi mode, you can play a music CD
or DVD-Video on the navigation system while nav-
igation is taking place. The operation automati-
cally switches to the memory navi mode when the
DVD Map Disc is removed from the navigation
system.
Navigation in the memory navi mode
During the memory navi mode, navigation is per-
formed only using the data read into the memory.
Therefore, some functions are restricted com-
pared with navigation using the DVD Map Disc
(DVD navi mode). These functions buttons, which
cannot be used in the memory navi mode, are
indicated in light grey. (For details, see page 22.)
If you want to use these functions, please insert
the DVD Map Disc again. In addition, you may
need to insert the DVD Map Disc and store new
data in the memory during navigation operation,
such as when the destination is far away. The
memory navi mode uses the following map data
to perform navigation.
Memory navi indicator
When new route guidance starts, the route data
from the DVD Map Disc is read into the memory
of the navigation system. The status of the mem-
ory navi mode is indicated by the following icons
on the lower right of the map screen.
(Green flashes): Reading the data
(Green is lit): Operated in memory navi mode
(Red is lit): Operated in memory navi mode,
but the distance for guidance is 20 km or less.
❒ Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the DVD Map Disc.
When disappears, memory navi mode is
ready. You can now remove the DVD Map Disc
and use the memory navi mode function.
How to listen to a CD
You can listen to audio CD by removing the DVD
Map Disc from the navigation system.
➲ About Memory Navigation ➞ “Memory navi
mode” on page 20. (For details, see page 123.)
1
Press the EJECT button to remove the
DVD Map Disc.
2
Insert the CD to the disc loading slot.