Pioneer AVIC-X1BT - Manual (Page 81)

79
Chapter
7
U
sing
the A
V
Source
(Pioneer A
V
Eq
uipment)
AV
Selecting tracks from the track
title list
Track title list lets you see the list of track titles on
a CD TEXT disc and select one of them to play
back.
❒ In the case of normal CDs, no title information
is recorded. Accordingly, the display shows “–”.
1
Touch “TRACK LIST” in the FUNCTION
menu.
2
Touch or to switch between the lists
of titles.
3
Touch the track title in the list.
That selection will begin to play.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1
Touch “PAUSE” in the FUNCTION menu.
Touching “PAUSE” switches between “ON”
and “OFF”.
Play of the current track pauses.
Using compression and bass
emphasis
You can use these functions only with a multi-CD
player that supports them.
Using COMP (compression) and DBE (dynamic
bass emphasis) functions lets you adjust the
sound playback quality of the multi-CD player.
Each of the functions has a two-step adjustment.
The COMP function balances the output of louder
and softer sounds at higher volumes. DBE boosts
bass levels to give playback a fuller sound. Listen
to each of the effects as you select through them
and use the one that best enhances the playback
of the track or CD that you are listening to.
1
Touch “COMP” in the FUNCTION menu.
If the multi-CD player does not support
COMP/DBE, NO COMP is displayed and
you cannot select the function.
Touch COMP repeatedly to switch between
the following settings:
OFF — COMP 1 — COMP 2 — OFF — DBE
1 — DBE 2
Using ITS playlists
ITS (Instant Track Selection) lets you make a play-
list of favourite tracks from those in the multi-CD
player magazine. After you have added your
favourite tracks to the playlist you can turn on ITS
play and play just those selections.
Creating a playlist with ITS program-
ming
You can use ITS to enter and playback up to 99
tracks per disc, for up to 100 discs (with the disc
title). (With multi-CD players sold before the CDX-
P1250 and CDX-P650, up to 24 tracks can be
stored in the playlist.)
1
Play a CD that you want to programme.
➲ How to select a CD ➞ Page 77
2
Touch “ITS MEMORY” in the FUNCTION
menu.
3
Touch  or  to select a track you want to
memorise.
4
Touch “MEMORY” to store the currently
playing track in the playlist.
MEMORY is displayed briefly and the cur-
rently playing selection is added to your ITS
playlist.
Touching “CLEAR” will delete all the tracks
recorded in the ITS playlist.
❒ After data for 100 discs has been stored in
memory, data for a new disc will overwrite
the oldest one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you have
entered into your ITS playlist. When you turn on
ITS play, tracks from your ITS playlist in the multi-
CD player will begin to play.
1
Select the repeat range.
➲ Repeating play ➞ Page 78
2
Touch “ITS PLAY” in the FUNCTION
menu.
Touching “ITS PLAY” switches between
“ON” and “OFF”.
Playback begins for those tracks in your playl-
ist within the previously selected M-CD or
DISC ranges.
M-CD