Pioneer AVIC-X1BT - Manual (Page 76)

74
Chapte
r
6
Using
the AV Source
(Built
-i
n DVD Driv
e and
Rad
io
)
AV
2
Press the TA/NEWS button to turn traffic
announcement standby on.
appears in the display. The tuner
will standby for traffic announcements.
If you turned TA function on while tuned in to
neither a TP nor another enhanced network’s
TP station, the
indicator lights.
To turn traffic announcements standby off,
press the TA/NEWS button again.
3
Use the VOLUME/ATT button to adjust
the TA volume when a traffic announce-
ment begins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press the TA/NEWS button while a traffic
announcement is being received to cancel
the announcement.
The tuner returns to the original source but
remains in standby mode until the TA/NEWS
button is pressed again.
You can also cancel the announcement by
pressing the SRC or the BAND button or by
moving the joystick while a traffic announce-
ment is being received.
❒ When the preset list is displayed, the TA
function icon will not be displayed.
➲ Switching screen display ➞ Page 113
❒ You can also turn on or off TA function in
the FUNCTION menu. Touching “TA”
switches between “ON” and “OFF”.
❒ The system switches back to the original
source following traffic announcement
reception.
❒ Only TP and other enhanced network’s TP
stations are tuned in during seek tuning or
BSM when TA is on.
Using PTY functions
You can tune in a station by using PTY informa-
tion.
Searching for an RDS station by PTY
information
You can search for general types of broadcasting
programmes.
➲ PTY list ➞ Page 76
1
Touch “PTY” in the FUNCTION menu.
2
Touch  or  to select a programme type.
There are four programme types:
NEWS&INF — POPULAR — CLASSIC —
OTHERS
3
Touch “START” to begin the search.
The tuner searches for a station broadcasting
that programme type.
To cancel the search, touch “STOP”.
❒ The programme of some stations may dif-
fer from that indicated by the transmitted
PTY.
❒ If no station is broadcasting the type of
programme you searched for, NOT
FOUND is displayed for about two sec-
onds and then the tuner returns to the
original station.
Using news programme interruption
When a news programme is broadcast from a
PTY code news station, the navigation system can
switch from any station to the news broadcast
station. When the news programme ends, recep-
tion of the previous programme resumes.
1
Press and hold the TA/NEWS button to
turn on news programme interruption.
Press the TA/NEWS button until
or
appears in the display.
To turn off news programme interruption,
press and hold the TA/NEWS button again.
A news programme can be cancelled by
pressing the TA/NEWS button.
You can also cancel the news programme by
pressing the SRC or the BAND button or by
moving the joystick while a news programme
is being received.
❒ When the preset list is displayed, the
NEWS function icon will not be displayed.
RD
S