Pioneer AVIC-X1BT - Manual (Page 126)

124
Ap
pe
nd
ix
NAVI
/A
V
*: Product Number in the Service Info Screen is not
displayed.
About the icon for the memory
navi mode
When new route guidance starts, the route data
from the DVD Map Disc is read into the memory
of the navigation system. The status of the mem-
ory navi mode is indicated by the following icons
on the lower right of the map screen.
(Green flashes): Reading the data
(Green is lit): Operated in memory navi mode
(Red is lit): Operated in memory navi mode,
but the distance for guidance is 20 km or less.
Where the distance for navigation guidance is
unknown, the icon flashes red. In that case,
the guidance may suddenly fail. It is therefore
recommended to reinsert the DVD Map Disc.
When disappears, memory navi mode is
ready. You can now remove the DVD Map Disc
and use the memory navi mode function.
If you want to remove the DVD Map Disc while
preparing for the memory navi mode, press
the EJECT button more than 2 seconds.
When the DVD Map Disc is removed, data
cannot be read and preparation for memory
navi mode will accordingly be cancelled.
(Since the reading of the map data used in the
memory navi mode is not complete, the map
scale may switch to a larger scale. In this
case, route guidance will continue up to the
location already memorised.)
In memory navi mode, you will be notified in three
cases: when the distance to the edge of the mem-
orised area is 20 km (12 mi), 10 km (6 mi) and 5
km (3 mi) respectively.
Preparation for memory navi mode will have to be
repeated if the vehicle enters an unrecorded area,
then returns to an area stored in the disc. (Prepa-
ration for the memory navi mode starts from the
location where the vehicle re-entered the area
stored on the disc.)
Major restrictions during the
memory navi mode
• Free zooming of scale is not available.
• Detailed city map cannot be displayed.
• If a route was set to your destination in mem-
ory navi mode, inserting the DVD Map Disc
automatically starts recalculation of another
route. (You cannot cancel this reroute opera-
tion. If the route calculation fails for some rea-
son, a message will appear asking you to either
recalculate a route (Reroute) or delete the cur-
rent route (Delete route). In this case, drive for
a while before touching either “Reroute” or
“Delete route” to delete the current route, then
reset the destination.)
• In some cases, you may not be able to use map
display mode during DVD navi mode. If the
map display mode is not changed during
memory navi mode, when the disc is set next
time, the display will return to the map display
mode used during the DVD navi mode.
Manual Station Search
Route Options menu
Edit Current Route –
View Current Route
U
Recalculate –
Route No.
Route Condition
Avoid Motorway
Avoid Ferry
Avoid Toll Road
Areas to Avoid
–
Settings menu
Volume
System Options
U
Short-Cut Selection
Map Display Options
Defined Locations
–
Demo Mode –
Time
Modify Current Location
Hardware Info
U
*
Restore Factory Settings
Shortcut menu
: Destination –
: Registration
: Vicinity Search
–
: Whole Route Overview –
: Overlay POI –
: Address Book –
: Route Options –
: Edit Current Route –
: Traffic On Route –
Main menu