Pioneer AVIC-X1BT - Manual (Page 55)

53
Chapter
4
Editing
the N
aviga
tion Utilities
NA
VI
Touch “Adjust Look” to display a screen for
selecting the panel pattern. Touch one of the
patterns from among those displayed
onscreen to change the panel to the selected
pattern.
❒ If you touch “Peak Hold Reset”, the maxi-
mum and minimum (green line) values
indicated in “Acceleration” and “Side
Acceleration” are reset.
❒ You cannot change the speedometer at the
centre.
❒ Selecting Demo mode in the Settings
menu enables you to perform a demon-
stration with random values.
Checking the Navigation Status
The navigation status, including the driving sta-
tus of a vehicle, positioning status by satellite,
learning status of the 3D sensor, and cable con-
nection status, can be checked.
Checking sensor learning status
and driving status
1
Touch “Settings” in the Main menu, then
touch “Hardware Info”.
2
Touch “3D Calibration Status”.
The 3D Calibration Status screen appears.
(1) Distance
Driving distance is indicated.
(2) Speed Pulse
Total number of speed pulses is indicated.
(3) Learning Status
Current driving mode is indicated.
(4) Degree of learning
Sensor learning situations of distance
(Distance), right turn (Right Turn), left turn
(Left Turn), and 3D detection (3D Detection)
are indicated by the length of bars.
❒ When tyres have been changed or chains fit-
ted, turning on the Speed Pulse allows the
system detects the fact that the tyre diameter
has changed, and automatically replaces the
value for calculating distance.
❒ If the ND-PG1 is connected, the distance cal-
culation value cannot be replaced automati-
cally.
(1)
(2)
(3)
(4)
(5) (7) (6)