Pioneer ANH-P10MP - Manual (Page 16)

Before You Start
En
01
Section
16
Using navigation
These are the basic steps necessary to oper-
ate the navigation. For more details and vari-
ous functions, refer to
Section 02: Navigation
starting on page 20.
1 Press OPEN to open the front panel.
CD loading slot appears.
If an audio CD is in the loading slot, press the
button and remove it.
2 Insert a Navigation CD into the CD
loading slot.
Reading of the disc starts.
3 Close the front panel.
If the navigation system has not yet been cali-
brated, a calibration journey is prompted (refer to
“Installation manual”).
4 When the Audio screen is shown, press
NAVI/OK to enter the Navigation mode.
The main navigation menu appears after a
while. Refer to
Main navigation menu on
page 21.
5 Select “DESTINATION” by moving the
rotary stick.
• Clockwise (or right): Next
• Counter-clockwise (or left): Back
Note
You can also select items by moving the rotary
stick up or down.
6 Confirm the selection by pressing
NAVI/OK.
Use NAVI/OK not only to switch the display
from the Audio screen to the Navigation screen,
but also to set an item after selecting it.
CD loading slot
button