Pioneer ANH-P10MP - Manual (Page 90)

Audio Adjustments
En
11
Section
90
Notes
• The MW/LW tuner volume level can also be
adjusted with source level adjustments.
• The built-in CD player and the multi-CD player
are set to the same source level adjustment
volume automatically.
• External unit 1 and external unit 2 are set to
the same source level adjustment volume au-
tomatically.
Using automatic sound
leveliser
During driving, noise in the vehicle changes
according to the driving speed and road con-
ditions. The automatic sound leveliser (ASL)
monitors such varying noise and automatical-
ly increases the volume level, if this noise be-
comes greater. This function controls not only
audio sources, but also the guidance voice of
navigation.
Adjusting ASL for audio vol-
ume
You can adjust the automatic sound leveliser
for audio source volume. The sensitivity (varia-
tion of volume level to noise level) of ASL can
be set to one of five levels.
1 Press AUDIO and then press ASL to se-
lect the ASL mode.
2 Press AUDIO to select the ASL setting
mode for audio volume.
3 Press to turn ASL on.
“ ASL ON” and “LEVEL Mid” appears in the
display.
To turn ASL off, press .
4 Press or to select the desired ASL
level.
Each press of or selects ASL level in the
following order:
Low (low)—Mid-Low (mid-low)—Mid
(mid)—
Mid-High (mid-high)—High (high)
Adjusting ASL for guidance
volume
You can switch on or off the automatic sound
leveliser for the navigation guidance volume.
1 Press AUDIO and then press ASL to se-
lect the ASL mode.
2 Press GUIDE to select the ASL setting
mode for navigation.
3 Press to turn ASL on.
To turn ASL off, press .