Audio adjustments using the equaliser, Recalling equaliser curves, Introduction of audio adjustments – Pioneer ANH-P10MP User Manual

Page 84: Audio menu

Advertising
background image

En

11

Section

84

Audio Adjustments

Using the equaliser

The equaliser lets you adjust the equalisation
to match vehicle interior acoustic characteris-
tics as desired.

Recalling equaliser curves

There are six stored equaliser curves which
you can easily recall at any time.

1

Press EEQ to switch to the easy equal-

iser mode.

2

Press the corresponding button to se-

lect the desired equaliser curve
Here is a list of the equaliser curves:

CUSTM is an adjusted equaliser curve that
you create.

• A separate

CUSTM curve can be created

for each source. (The built-in CD player
and the multi-CD player are set to the
same equaliser adjustment setting auto-
matically.) If you make adjustments, the
equaliser curve settings will be memorised
in “

CUSTM”.

• When “

FLAT” is selected no supplement or

correction is made to the sound. This is
useful to check the effect of the equaliser
curves by switching alternatively between

FLAT” and a set equaliser curve.

Note

You can also use and to select the desired
equaliser curve.

Introduction of audio
adjustments

Audio menu

The audio menu has the following functions:
F/B (balance adjustment)
EQ (equaliser curve adjustment)
BASS (bass level adjustment)
TREBLE (treble level adjustment)
LOUD (loudness)
ASL (automatic sound leveliser)
SW 1 (subwoofer on/off setting) or NoFAD1
(nonfading output on/off setting)
SW 2 (subwoofer setting) or NoFAD2 (non-
fading output setting)
HPF (high pass filter)
SLA (source level adjustment)
EQ-EX
SFEQ (sound focus equaliser setting)

If

EQ-EX function has been selected and only

when

EQ-EX is turned on and “CUSTM” is select-

ed as the equaliser curve, you can switch to

BASS” and “TREBLE”.

Only when the subwoofer controller setting is

FULL Preout :FULL”, you cannot switch to “SW

1”. (Refer to Setting the rear output and subwoof-
er controller
on page 94.)

You can select “

SW 2” only when subwoofer

output is turned on in the “

SW 1”.

Display

Equaliser curve

FLAT

Flat

S.BASS

Super bass

PWRFL

Powerful

NATRL

Natural

VOCAL

Vocal

CUSTM

Custom

Advertising