Pioneer ANH-P10MP - Manual (Page 40)

Navigation
En
02
Section
40
4 To store the place, select and
press NAVI/OK briefly.
Destination memory list is displayed.
5 Select the desired place in the list by
using the rotary stick and then press
NAVI/OK.
Returns to the route menu.
6 Select “START-” for starting route guid-
ance.
The navigation system starts giving route
guidance after storing information on the
specified location in the destination memory.
If you want to store another location, select
“ NEW DESTINATION” and repeat the operations
from step 1.
Notes
• A total of 50 destinations can be stored in the
destination memory.
• When the destination memory is full, “ Desti-
nation memory full” is displayed.
—
DELETE: jump to the destination memory
in order to delete a destination.
— BACK: cancel saving.
Deleting stored destinations
1 From the main navigation menu, select
“DEST. MEMORY” and press NAVI/OK.
2 Select the destination to be deleted
and press DEL.
System settings for
navigation
If you want to change the various settings for
the items displayed in the navigation screen
or for performing navigation, use the system
settings menu.
Displaying system settings
menu
1 On the main navigation menu, press
BACK.
The system settings menu appears.
TIME: the internal system clock can be set to
local time. Refer to Setting the time on page 41.
SAVE POSITION: the current position can be
saved and stored in the destination memory. Re-
fer to
Saving the position on page 41.
LANGUAGE*: language setting for the navi-
gation system. Refer to Setting the language for
navigation on page 42.
MEASURING UNIT: the measuring units can
be changed from metres to yards. Refer to Select-
ing the measuring unit on page 42.
ANNOUNCEMENT ETA: announcement of
the estimated time of arrival can be switched on/
off. Refer to
Switching announcement of the esti-
mated time of arrival on/off on page 42.
ETA CALCULATION: this setting controls the
estimated average speed when driving on a mo-
torway. Refer to
Average speed on page 43.
SPEEDLIMITS: announcement of the speed
limits of the road can be switched on/off. Refer to
Displaying the speed limits on page 43.