Pioneer ANH-P10MP - Manual (Page 62)

En
07
Section
62
MP3/WMA/WAV Player
Playing MP3/WMA/WAV
These are the basic steps necessary to play an
MP3/WMA/WAV with your built-in CD player.
More advanced MP3/WMA/WAV operation is
explained in
Advanced built-in CD player (MP3/
WMA/WAV) operation starting on page 64.
Folder number indicator
Shows the folder number currently playing.
Track number indicator
Shows the track (file) currently playing.
MP3/WMA/WAV indicator
Shows when the MP3/WMA/WAV file is
playing.
Bit rate indicator
Shows the recorded bit rate of the file cur-
rently playing.
Play time indicator
Shows the elapsed playing time of the cur-
rent track (file).
1 Press OPEN to open the front panel.
CD loading slot appears.
If a navigation CD is in the loading slot, press
the button and remove it.
After a CD has been inserted, press SOURCE
to select the built-in CD player.
The navigation CD must be inserted to start
the route calculation. During the calculation, the
prompt CD flashes on the display. Once the cal-
culation has been completed, the prompt CD ex-
tinguishes, the navigation CD can be removed
and an audio CD can be inserted.
Do not use with the front panel left open. If
the front panel is left open, it may result in
injury in the event of an accident.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
You can eject a CD by pressing .
To avoid a malfunction, make sure that no
metal object comes into contact with the termi-
nals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 Press or to select a folder.
You cannot select a folder that does not have
an MP3/WMA/WAV file recorded in it.
To return to folder 01 (ROOT), press and hold
BAND/ESC. However, if folder 01 (ROOT) con-
tains no files, playback commences with folder
02.
6 To perform fast forward or reverse,
press and hold or .
This is fast forward and reverse operation only
for the file being played. This operation is can-
celled when the previous or next file is reached.
If you select the search method to “ Rough
search”, pressing and holding or enables
you to search every ten track in the current disc.
(
Selecting the search method on page 66.)
CD loading slot
button