Setting the time, Saving the position, Fer to – Pioneer ANH-P10MP User Manual
Page 41: Navigation
02
Section
Navigation
41
En
English
Note
You cannot perform any operation during route
guidance. First delete the route, or wait until you
have reached your destination.
Setting the time
In order to achieve correct navigation on
routes requiring guidance under time restric-
tions and to calculate the estimated time of
arrival, it is necessary to set the GMT time
transmitted from satellites to the current time
zone.
1
In the system settings menu, select
“TIME” and press NAVI/OK.
2
To change the time display, press 24H.
The multi-function button changes to
12H
and the time display changes from the 24
hour to the 12 hour display.
You can return to the 24 hour display by
pressing
12H.
3
To change the time every half an hour,
press + or -.
4
Press OK.
The time set is accepted and the programme
returns to the system settings menu.
You can also operate by pressing
NAVI/OK.
Saving the position
1
In the system settings menu, select
“SAVE POSITION” and then press NAVI/
OK.
The current position, in degrees of longitude
and latitude, is displayed.
2
To store the current position, press
NAVI/OK again.
3
Proceed to step 3 of Storing a specified