Pioneer ANH-P10MP - Manual (Page 30)

Navigation
En
02
Section
30
2 Select a desired option, and then press
NAVI/OK.
The selected route calculation conditions are
set and the screen returns to the route menu.
Notes
• The setting “ SHORT ROUTE” is often recom-
mended for larger cities or metropolis.
• If Dynamic route guidance has been activat-
ed, the routes are calculated using the “ FAST
ROUTE” setting. Further information under
Dynamic navigation with TMC on page 34.
• Dynamic route guidance is not possible in all
countries.
• For short distances (up to 200 km), routes
without motorways can only be calculated.
Specifying the types of road
1 On the route menu, select “ROUTE
SETTINGS” and press NAVI/OK.
Route settings menu appears.
2 On the route settings menu, select
“RESTRICTIONS” and press NAVI/OK.
3 Select a desired option, and then press
NAVI/OK.
MOTORWAY: selects whether using motor-
ways or not.
FERRIES: selects whether using ferries or not.
TOLL: selects whether using toll roads or not.
4 Press NAVI/OK for more than 2 sec-
onds.
The selected route calculation conditions are
set and the screen returns to the route menu.
Note
For short distances (up to 200 km), routes with-
out motorways can only be calculated.
Route calculation condition