Pioneer ANH-P10MP - Manual (Page 75)

08
Section
Multi-CD Player
75
En
English
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favourite tracks from those in the
multi-CD player magazine. After you have add-
ed your favourite tracks to the playlist you can
turn on ITS play and play just those selections.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to
99 tracks per disc, up to 100 discs (with the
disc title). (With multi-CD players sold before
the CDX-P1250 and CDX-P650, up to 24 tracks
can be stored in the playlist.)
1 Play a CD that you want to pro-
gramme.
Press or to select the CD.
2 Press FUNC and then press NEXT.
3 Press ITS.M to select the ITS program-
ming mode.
4 Select the desired track by pressing
or .
5 Press MEMO to store the currently
playing track in the playlist.
“
Memory complete” is displayed briefly and
the currently playing selection is added to
your playlist.
You can also use to store the currently play-
ing track in the playlist.
6 Press BAND/ESC to return to the play-
back display.
Note
After data for 100 discs has been stored in mem-
ory, data for a new disc will overwrite the oldest
one.
Playback from your ITS playlist
ITS play lets you listen to the tracks that you
have entered into your ITS playlist. When you
turn on ITS play, tracks from your ITS playlist
in the multi-CD player will begin to play.
1 Select the repeat range.
Refer to Repeating play on page 71.
2 Press FUNC and then press NEXT.
3 Press ITS.P to select the ITS play mode.
4 Press ITS.P to turn ITS play on.
The light illuminates. Playback begins of
those tracks from your playlist within the pre-
viously selected
Magazine repeat or Disc re-
peat ranges.
To turn ITS play off, press ITS.P again.
Erasing a track from your ITS
playlist
When you want to delete a track from your ITS
playlist, you can if ITS play is on.
If ITS play is already on, skip to step 2. If ITS
play is not already on, press
FUNC.
1 Play a CD you want to delete a track
from your ITS playlist, and turn ITS play
on.
Refer to
Playback from your ITS playlist on this
page.
2 Press FUNC and then press NEXT.
3 Press ITS.M to select the ITS program-
ming mode.
4 Select the desired track by pressing
or .
5 Press CLEAR to erase the track from
your ITS playlist.