Pioneer ANH-P10MP - Manual (Page 54)

RDS
En
05
Section
54
Using radio text
This tuner can display radio text data trans-
mitted by RDS stations, such as station infor-
mation, the name of the currently broadcast
song and the name of the artist.
• The tuner automatically memorises the
three latest radio text broadcasts received,
replacing text from the least recent recep-
tion with new text when it is received.
Displaying radio text
You can display the currently received radio
text and the three most recent radio text.
1 Press NEXT until “R.TEXT” appears.
2 Press R.TEXT to switch to the radio
text mode.
Radio text for the currently broadcasting sta-
tion is displayed.
You can cancel radio text display by pressing
BAND/ESC.
When no radio text is received, “ No text” is
displayed.
3 Press or to recall the three most
recent radio text.
Pressing or switches between the cur-
rent and the three radio text data displays.
If there is no radio text data in memory the
display will not change.
Storing and recalling radio
text
You can store data from up to six radio text
transmissions at buttons
MEMO1–MEMO6.
1 Display the radio text you want to
store in memory.
Refer to
Displaying radio text on this page.
2 Press any of MEMO1–MEMO6 and
hold to store the selected radio text.
The memory number will display and the se-
lected radio text has been stored in memory.
The next time you press the same
MEMO1–
MEMO6 button in the radio text display the
stored text is recalled from memory.