Baldor GLC40 - Manual (Page 79)

Appendix A
Options & Accessories
Options & Accessories A‐1 MN2408
Battery Charger
BTCGR6 Battery Charger - 12 Volt / 6 Amp Float. Includes 6 ft power cord with grounding plug
for AC input power and 4 ft power cord with ring terminals for DC output. UL Listed.
BTCGR10A Battery Charger - 12 Volt /10 Amp Float. Includes terminal strip for AC input power
and DC output.UL Listed.
Figure A‐1 Recommended Mounting Locations
GLC60-105 Battery Charger
Mounting Locations GLC30-45 Battery Charger
Mounting Locations
BTCGR6
BTCGR10A Battery
Tray BTCGR10A
BTCGR6
Battery
Tray
Installation Considerations:
Shore power must be available (120VAC or 240VAC) to power the battery charger and other
components that may be installed). Shore power outlets or wiring must be located close to
Battery Charger.
BTCGR6 Charger (refer to charger manual for specific details)
1. Mount charger, refer to Figure A‐1 to determine suggested location.
2. Connect charger negative wire to battery ”-” negative terminal.
3. Connect charger positive wire (with fuse) to battery ”+” positive terminal.
4. Connect charger AC power cord to shore power outlet.
BTCGR10A Charger (refer to charger manual for specific details)
1. Mount charger, refer to Figure A‐1 to determine suggested location.
2. Connect charger negative wire (Black) to battery ”-” negative terminal.
3. Connect charger positive wire (Red) to battery”+” positive terminal.
4. Connect charger AC power cord to shore power outlet.