Baldor GLC40 User Manual
Page 85
Options & Accessories A‐7
MN2408
Remote Annuciators
Remote Annunciator - For use with MEC2 Controller. Provides remote anunciation of faults and
generator status. Up to 20 individual fault conditions are remotely monitored utilizing both visual
LED lights & audible alarm annunciation. Lamp test and alarm horn silence pushbuttons are
provided. Each fault is individually programmable for audible horn operation and alarm labels are
field configurable. Requires 12VDC 100mA power supply to operate (engine starting battery can
be power supply).”
Figure A‐7 MEC2 Remote Annunciator
Figure A‐8 Intelilite Remote Annunciator
Only one 120R resistor can be connected
to the CAN bus (If it is the last device on the
network (termination).
AB
DC power
supply
+
120R *
*
CAN bus Connection (200m Maximum)