Boss Audio Systems BR-800 User Manual

Page 13

Advertising
background image

13

Panel Descriptions

Track [1]–[7/8] faders

These faders adjust the playback volume of each track.

[RHYTHM] fader

This fader adjusts the volume of the rhythm.

“Playing Patterns” (p. 91)
“Playing an Arrangement” (p. 93)

[MASTER] fader

This fader adjusts the overall volume.

Track 1–7/8 [PLAY] buttons

These buttons select the tracks that will play.

Unlit:

Track that contains no data (unrecorded)

Lit:

Track that will play (contains data)

Blinking:

Track that will not play (contains data)

Track 1–7/8 [REC] buttons

These buttons select the tracks that will be recorded.

Unlit:

Track that will not be recorded

Lit:

Track that will be recorded

Blinking:

Track that will be loop-recorded

“Recording” (p. 36)

[TAP TEMPO] button

You can set the tempo of the rhythm by repeatedly pressing
this button at the desired timing.

“Using [TAP TEMPO] Button to Set the Tempo” (p.
92), (p. 94)

[MASTER FX] (Mastering effect) button

This button accesses a screen where you can turn the
mastering effect on/off and edit its settings.

“Mastering” (p. 111)

[RETRY] button

This button returns to the time location at which you last
started recording.

[REPEAT] button

Use this button to specify a desired section for repeated
listening.

“Playing Back Repeatedly (Repeat)” (p. 43)

[ZERO] button

This button moves you to the 00:00:00-00:0 time location.

[REW] (Rewind) button

The song will continue rewinding while you hold down this
button.

[FF] (Fast-forward) button

The song will continue fast-forwarding while you hold
down this button.

[STOP] button

This button stops recording/playback.

“Recording” (p. 40)
“Playback” (p. 41)

[PLAY] button

This button plays the song. If the [REC] button is blinking,
pressing [PLAY] button will start recording. This button
will light green during recording or playback.

“Recording” (p. 40)
“Playback” (p. 41)

[REC] (Recording) button

This is the Recording button. In addition to the normal
Recording operation, it is also used to punch-in/out. While
in recording standby, this button will blink red, and will
change to steadily lit red during recording.

“Recording” (p. 40)
“Manual Punch-In/Out” (p. 45)

3

4

5

BR800_e.book 13 ページ 2010年11月2日 火曜日 午前8時28分

Advertising