Boss Audio Systems BR-800 - Manual (Page 131)

131
Editing
Mastering
Using USB
Con
venient
Functions
Appendix
es
Quic
k Star
t
Getting Read
y
to Recor
d
Recor
ding/
Pla
ybac
k
Using Eff
ects
Using Rh
ythm
Using a Foot Switch/Expression Pedal
If you connect a foot switch (such as the separately available
BOSS FS-5U or Roland DP-2) to the FOOT SW/EXP PEDAL
jack on the rear panel, you’ll be able to control some
functions using your foot.
fig.ConnectFootSW-e.eps
The expression pedal can be used when the insert effect is
turned on.
Depending on the effect settings, it will function as follows.
• If the WAH (p. 66) TYPE is set to “PEDAL,” the
expression pedal will function as a wah pedal.
• If the PITCH SHIFTER (p. 75) TYPE is set to “PEDAL,”
the expression pedal will function as a pitch shifter
pedal.
• If TYPE for WAH and TYPE for PITCH SHIFTER have
both been set to something other than “PEDAL,” the
expression pedal will function as a volume pedal.
Here’s how to assign the function of the foot switch.
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SYSTEM,” and press the [ENTER] button.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “FOOT SWITCH” and use the dial to
specify the function of the foot switch.
D_System_FS_Play.eps
4
Press the [EXIT] button a number of times to return to
the play screen.
Set the polarity switch
as shown in the following.
Foot Switch
(FS-5U etc.)
Expression Pedal
(Roland EV-5 etc.)
• Use only the specified expression pedal (Roland
EV-5, BOSS FV-500L/FV-500H; sold separately).
By connecting any other expression pedals, you
risk causing malfunction and/or damage to the
unit.
• When using an expression pedal, set the pedal’s
MIN volume to “0.”
Using an Expression Pedal
Using a Foot Switch
Value Explanation
PLAY
The song will alternate between play
and stop each time you press the foot
switch.
REC
The foot switch will perform the
same operation as pressing the
[REC] button.
BR800_e.book 131 ページ ２０１０年１１月２日 火曜日 午前８時２８分